Measure and choose
Send the opening size and current door; the technician measures and advises on type.
Supply and install a new sectional, roller or tilt door, with opener if required.
When a door is past economical repair, badly corroded, or you are upgrading an old manual tilt door, a new door is the better-value path, and it is the one job in this list where the right product choice matters as much as the fitting. The technicians in our network supply and install sectional, roller and tilt doors, fit and set up a powered opener where you want automation, and remove and dispose of the old door. Across Brisbane's post-war suburbs the common project is replacing a single tilt door with an insulated sectional or roller door for better clearance and quieter operation. Our team measures the opening, talks through door type, material and wind rating, and gives a written fixed-price quote so there are no surprises. Send the opening width and height and a photo of the current door to start.
Supply and fit of an insulated or single-skin sectional door, the most popular upgrade for clearance and quiet operation.
Supply and fit of a roller door where headroom is tight or a single rolling curtain suits the opening better than panels.
Supply and fit of a one-piece tilt door where the look of the original is preferred or the frame suits a tilt mechanism.
Fitting and setting up a powered opener with remotes and safety sensors, with the mains side wired by a licensed electrician.
When replacement beats repair
A door that is rusting through, repeatedly failing, or no longer secure has usually reached the point where each repair is good money after bad. Comparing a repair quote against a new door often shows the new door is the better long-term value, especially once an ageing opener is added in.
Upgrading an old manual tilt door is the common Brisbane project, particularly in post-war suburbs where the original tilt doors are decades old. A modern insulated sectional or roller door gives better clearance inside the garage, quieter travel, and the option of automation that the old door never had.
Door choice is not just looks: South East Queensland openings often need a wind-rated door, and a garage used as a workshop or with a room above benefits from insulation. Our team walks through type, material and wind rating against your opening and budget so the door suits the home rather than just filling the hole.
Send the opening size and current door; the technician measures and advises on type.
A written quote covering the door, opener, removal and disposal, with no surprises.
Old door removed, new door and opener installed, with electrical work licensed.
Door balanced, opener and remotes set, and a handover on operation and care.
The technician advises on sectional, roller or tilt against your headroom, wind rating and use, so you buy the door that suits the home, not just the cheapest panel.
Removal and disposal of the old door and any redundant hardware is part of the job, so you are not left with a heavy door to get rid of yourself.
Where a powered opener is fitted, the mains electrical work is carried out by a licensed electrician in our network under the QLD Electrical Safety Act 2002.
A new door is priced on size, type, material, insulation and whether an opener is added; larger and double doors sit above the single-door guide.
| Item | Indicative range |
|---|---|
| Service call-out / standard service | $120 - $200 |
| New sectional door (single, supplied and installed) | $2,500 - $5,000 |
Real questions Brisbane homeowners ask about this work.
The New Garage Door Installation service is available across all 16 Brisbane suburbs in our coverage area. Pick your suburb for the local notes, or submit the form for a free review.
Get matched with a Brisbane technician
Need new garage door installation in Brisbane?
Submit the form for new garage door installation across the Brisbane catchment. A qualified technician in our network will be in touch with indicative pricing and a written fixed-price quote.